Date: Sun, 1 Dec 2002 11:58:09 +0100
From: Folkert van Heusden
Subject: foutcodes bij burnen met cdrecord

Is er iemand bekend met de foutcode's die cdrecord teruggeeft bij het
burnen?

root@keetweej:/data2/data# cdrecord -v -fs=16m speed=2 dev=0,0,0 -data
debian-30r0-alpha-binary-1.iso
Cdrecord 1.11a34 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.6'
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   :
Vendor_info    : 'RICOH   '
Identifikation : 'MP6200S         '
Revision       : '2.20'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC SWABAUDIO
Supported modes: TAO PACKET SAO
Drive buf size : 786432 = 768 KB
FIFO size      : 16777216 = 16384 KB
Track 01: data   578 MB
Total size:      664 MB (65:50.32) = 296274 sectors
Lout start:      664 MB (65:52/24) = 296274 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11753 (97:25/22)
  ATIP start of lead out: 335100 (74:30/00)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 8
Manufacturer: Hitachi Maxell, Ltd.
Blocks total: 335100 Blocks current: 335100 Blocks remaining: 38826
Starting to write CD/DVD at speed 2 in real TAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:  578 of  578 MB written (fifo 100%) [buf  99%]   2.0x.
Track 01: Total bytes read/written: 606765056/606765056 (296272
sectors).
cdrecord: Input/output error. flush cache: scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 04 84 BF 0A 00 00 00 00 08 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x08 Qual 0x00 (logical unit communication failure) Fru 0x0
Sense flags: Blk 296127 (valid)
cmd finished after 12.633s timeout 120s
Trouble flushing the cache
Writing  time: 1997.686s
Average write speed   2.0x.
Min drive buffer fill was 98%
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no
error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 71 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x71 Qual 0x04 (decompression exception long algorithm id)
[No
matc
ing qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.013s timeout 480s
cmd finished after 0.013s timeout 480s
Fixating time:    0.020s
cdrecord: fifo had 9558 puts and 9558 gets.
cdrecord: fifo was 0 times empty and 9295 times full, min fill was 98%.


-- 
Afmelden: mail 'SIG linux' naar listserv@nllgg.nl
Nederlandse Linux Gebruikers Groep        http://www.nllgg.nl/
Mailinglist info: http://mail.nllgg.nl/