[linux] Virtuele machine start niet meer op

harry.harmsen op gmail.com harry.harmsen op gmail.com
Za Jun 23 12:40:46 CEST 2018 

*Linux Mint 17.3. Na terugzetten van een vorige situatie wil mijn Oracle VM
Virual Box niet meer opstarten. Ik krijg de volgende foutmelding:*

*Kernel driver not installed (rc=-1908)*
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there
is a permission problem with /dev/vboxdrv. Please reinstall the kernel
module by executing
'/sbin/rcvboxdrv setup'
as root. If it is available in your distribution, you should install the
DKMS package first. This package keeps track of Linux kernel changes and
recompiles the vboxdrv kernel module if necessary.
where: suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The
support driver is not installed. On linux, open returned ENOENT.

*Als ik dan in de terminal als root de aangegeven opdracht uitvoer, is dit
het terminalscherm:*

harry op harry-MS-7708 ~ $ sudo /sbin/rcvboxdrv setup
[sudo] password for harry:
Stopping VirtualBox kernel modules ...done.
Uninstalling old VirtualBox DKMS kernel modules ...done.
Trying to register the VirtualBox kernel modules using DKMSError! Bad
return status for module build on kernel: 4.15.13-041513-generic (x86_64)
Consult /var/lib/dkms/vboxhost/5.0.40/build/make.log for more information.
...failed!
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules ...failed!
(Look at /var/log/vbox-install.log to find out what went wrong)
harry op harry-MS-7708 ~ $

*Het genoemde logbestand ziet er zo uit:*

Uninstalling modules from DKMS
  removing old DKMS module vboxhost version  5.0.40

-------- Uninstall Beginning --------
Module:  vboxhost
Version: 5.0.40
Kernel:  4.0.0-040000-generic (x86_64)
-------------------------------------

Status: Before uninstall, this module version was ACTIVE on this kernel.

vboxdrv.ko:
 - Uninstallation
   - Deleting from: /lib/modules/4.0.0-040000-generic/kernel/misc/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

vboxnetflt.ko:
 - Uninstallation
   - Deleting from: /lib/modules/4.0.0-040000-generic/kernel/misc/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

vboxnetadp.ko:
 - Uninstallation
   - Deleting from: /lib/modules/4.0.0-040000-generic/kernel/misc/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

vboxpci.ko:
 - Uninstallation
   - Deleting from: /lib/modules/4.0.0-040000-generic/kernel/misc/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

depmod....

DKMS: uninstall completed.

------------------------------
Deleting module version: 5.0.40
completely from the DKMS tree.
------------------------------
Done.
Attempting to install using DKMS

Creating symlink /var/lib/dkms/vboxhost/5.0.40/source ->
                 /usr/src/vboxhost-5.0.40

DKMS: add completed.

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area....
make KERNELRELEASE=4.15.13-041513-generic -C
/lib/modules/4.15.13-041513-generic/build
M=/var/lib/dkms/vboxhost/5.0.40/build....(bad exit status: 2)
Failed to install using DKMS, attempting to install without
make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0
CONFIG_MODULE_SIG= -C /lib/modules/4.15.13-041513-generic/build modules
Makefile:946: "Cannot use CONFIG_STACK_VALIDATION=y, please install
libelf-dev, libelf-devel or elfutils-libelf-devel"
test -e include/generated/autoconf.h -a -e include/config/auto.conf || (
    \
    echo >&2;                            \
    echo >&2 "  ERROR: Kernel configuration is invalid.";        \
    echo >&2 "         include/generated/autoconf.h or
include/config/auto.conf are missing.";\
    echo >&2 "         Run 'make oldconfig && make prepare' on kernel src
to fix it.";    \
    echo >&2 ;                            \
    /bin/false)
mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/*
make -f ./scripts/Makefile.build obj=/tmp/vbox.0
  gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d  -nostdinc -isystem
/usr/lib/gcc/x86_64-linux-gnu/4.8/include -I./arch/x86/include
-I./arch/x86/include/generated  -I./include -I./arch/x86/include/uapi
-I./arch/x86/include/generated/uapi -I./include/uapi
-I./include/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__
-fno-pie -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
-fno-strict-aliasing -fno-common -fshort-wchar
-Werror-implicit-function-declaration -Wno-format-security -std=gnu89
-fno-PIE -fno-pie -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -m64
-falign-jumps=1 -falign-loops=1 -mno-80387 -mno-fp-ret-in-387
-mpreferred-stack-boundary=3 -mtune=generic -mno-red-zone -mcmodel=kernel
-funit-at-a-time -DCONFIG_X86_X32_ABI -DCONFIG_AS_CFI=1
-DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1
-DCONFIG_AS_FXSAVEQ=1 -DCONFIG_AS_SSSE3=1 -DCONFIG_AS_CRC32=1
-DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -DCONFIG_AS_SHA1_NI=1
-DCONFIG_AS_SHA256_NI=1 -pipe -Wno-sign-compare
-fno-asynchronous-unwind-tables -mindirect-branch=thunk-extern
-mindirect-branch-register -DRETPOLINE -fno-delete-null-pointer-checks -O2
-Wno-maybe-uninitialized --param=allow-store-data-races=0
-DCC_HAVE_ASM_GOTO -Wframe-larger-than=1024 -fstack-protector-strong
-fno-omit-frame-pointer -fno-optimize-sibling-calls -pg -include
/tmp/vbox.0/include/VBox/SUPDrvMangling.h
-I/lib/modules/4.15.13-041513-generic/build/include -I/tmp/vbox.0/
-I/tmp/vbox.0/include -I/tmp/vbox.0/r0drv/linux -I/tmp/vbox.0/vboxdrv/
-I/tmp/vbox.0/vboxdrv/include -I/tmp/vbox.0/vboxdrv/r0drv/linux
-D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0
-DVBOX -DRT_WITH_VBOX -DVBOX_WITH_HARDENING -DSUPDRV_WITH_RELEASE_LOGGER
-Wno-declaration-after-statement -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_AMD64
-DVBOX_WITH_64_BITS_GUESTS -fno-pie  -DMODULE
-DKBUILD_BASENAME='"SUPDrv_linux"'  -DKBUILD_MODNAME='"vboxdrv"' -c -o
/tmp/vbox.0/linux/SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c
gcc: error: unrecognized command line option ‘-fstack-protector-strong’
make[2]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Fout 1
make[1]: *** [_module_/tmp/vbox.0] Fout 2
make: *** [vboxdrv] Fout 2





*Maar ik krijg nog steeds de virtuele machine niet opgestart.Wat moet ik
nog meer doen?Alvast bedankt voor de hulp.*

Groet,
Harry Harmsen
Assen
------------- volgend deel ------------
Een HTML-bijlage is gescrubt...
URL: <https://lists.nllgg.nl/pipermail/linux/attachments/20180623/340f9afc/attachment.html>

Meer informatie over de Linux maillijst