[linux] Virtuele machine start niet meer op
Geert Stappers
stappers op stappers.nl
Za Jun 23 12:50:54 CEST 2018
On Sat, Jun 23, 2018 at 12:40:46PM +0200, harry.harmsen op gmail.com wrote:
> *Linux Mint 17.3. Na terugzetten van een vorige situatie wil mijn Oracle VM
> Virual Box niet meer opstarten. Ik krijg de volgende foutmelding:*
>
> *Kernel driver not installed (rc=-1908)*
> The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there
> is a permission problem with /dev/vboxdrv. Please reinstall the kernel
> module by executing
> '/sbin/rcvboxdrv setup'
> as root. If it is available in your distribution, you should install the
> DKMS package first. This package keeps track of Linux kernel changes and
> recompiles the vboxdrv kernel module if necessary.
> where: suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The
> support driver is not installed. On linux, open returned ENOENT.
>
> *Als ik dan in de terminal als root de aangegeven opdracht uitvoer, is dit
> het terminalscherm:*
>
> harry op harry-MS-7708 ~ $ sudo /sbin/rcvboxdrv setup
> [sudo] password for harry:
> Stopping VirtualBox kernel modules ...done.
> Uninstalling old VirtualBox DKMS kernel modules ...done.
> Trying to register the VirtualBox kernel modules using DKMSError! Bad
> return status for module build on kernel: 4.15.13-041513-generic (x86_64)
> Consult /var/lib/dkms/vboxhost/5.0.40/build/make.log for more information.
> ...failed!
> (Failed, trying without DKMS)
> Recompiling VirtualBox kernel modules ...failed!
> (Look at /var/log/vbox-install.log to find out what went wrong)
> harry op harry-MS-7708 ~ $
>
> *Het genoemde logbestand ziet er zo uit:*
>
> Uninstalling modules from DKMS
> removing old DKMS module vboxhost version 5.0.40
>
> -------- Uninstall Beginning --------
> Module: vboxhost
> Version: 5.0.40
> Kernel: 4.0.0-040000-generic (x86_64)
> -------------------------------------
>
> Status: Before uninstall, this module version was ACTIVE on this kernel.
>
> vboxdrv.ko:
> - Uninstallation
> - Deleting from: /lib/modules/4.0.0-040000-generic/kernel/misc/
> - Original module
> - No original module was found for this module on this kernel.
> - Use the dkms install command to reinstall any previous module version.
>
> vboxnetflt.ko:
> - Uninstallation
> - Deleting from: /lib/modules/4.0.0-040000-generic/kernel/misc/
> - Original module
> - No original module was found for this module on this kernel.
> - Use the dkms install command to reinstall any previous module version.
>
> vboxnetadp.ko:
> - Uninstallation
> - Deleting from: /lib/modules/4.0.0-040000-generic/kernel/misc/
> - Original module
> - No original module was found for this module on this kernel.
> - Use the dkms install command to reinstall any previous module version.
>
> vboxpci.ko:
> - Uninstallation
> - Deleting from: /lib/modules/4.0.0-040000-generic/kernel/misc/
> - Original module
> - No original module was found for this module on this kernel.
> - Use the dkms install command to reinstall any previous module version.
>
> depmod....
>
> DKMS: uninstall completed.
>
> ------------------------------
> Deleting module version: 5.0.40
> completely from the DKMS tree.
> ------------------------------
> Done.
> Attempting to install using DKMS
>
> Creating symlink /var/lib/dkms/vboxhost/5.0.40/source ->
> /usr/src/vboxhost-5.0.40
>
> DKMS: add completed.
>
> Kernel preparation unnecessary for this kernel. Skipping...
>
> Building module:
> cleaning build area....
> make KERNELRELEASE=4.15.13-041513-generic -C
> /lib/modules/4.15.13-041513-generic/build
> M=/var/lib/dkms/vboxhost/5.0.40/build....(bad exit status: 2)
> Failed to install using DKMS, attempting to install without
> make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0
> CONFIG_MODULE_SIG= -C /lib/modules/4.15.13-041513-generic/build modules
> Makefile:946: "Cannot use CONFIG_STACK_VALIDATION=y, please install
> libelf-dev, libelf-devel or elfutils-libelf-devel"
> test -e include/generated/autoconf.h -a -e include/config/auto.conf || (
> \
> echo >&2; \
> echo >&2 " ERROR: Kernel configuration is invalid."; \
> echo >&2 " include/generated/autoconf.h or
> include/config/auto.conf are missing.";\
> echo >&2 " Run 'make oldconfig && make prepare' on kernel src
> to fix it."; \
> echo >&2 ; \
> /bin/false)
> mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/*
> make -f ./scripts/Makefile.build obj=/tmp/vbox.0
> gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem
> /usr/lib/gcc/x86_64-linux-gnu/4.8/include -I./arch/x86/include
> -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi
> -I./arch/x86/include/generated/uapi -I./include/uapi
> -I./include/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__
> -fno-pie -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
> -fno-strict-aliasing -fno-common -fshort-wchar
> -Werror-implicit-function-declaration -Wno-format-security -std=gnu89
> -fno-PIE -fno-pie -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -m64
> -falign-jumps=1 -falign-loops=1 -mno-80387 -mno-fp-ret-in-387
> -mpreferred-stack-boundary=3 -mtune=generic -mno-red-zone -mcmodel=kernel
> -funit-at-a-time -DCONFIG_X86_X32_ABI -DCONFIG_AS_CFI=1
> -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1
> -DCONFIG_AS_FXSAVEQ=1 -DCONFIG_AS_SSSE3=1 -DCONFIG_AS_CRC32=1
> -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -DCONFIG_AS_SHA1_NI=1
> -DCONFIG_AS_SHA256_NI=1 -pipe -Wno-sign-compare
> -fno-asynchronous-unwind-tables -mindirect-branch=thunk-extern
> -mindirect-branch-register -DRETPOLINE -fno-delete-null-pointer-checks -O2
> -Wno-maybe-uninitialized --param=allow-store-data-races=0
> -DCC_HAVE_ASM_GOTO -Wframe-larger-than=1024 -fstack-protector-strong
> -fno-omit-frame-pointer -fno-optimize-sibling-calls -pg -include
> /tmp/vbox.0/include/VBox/SUPDrvMangling.h
> -I/lib/modules/4.15.13-041513-generic/build/include -I/tmp/vbox.0/
> -I/tmp/vbox.0/include -I/tmp/vbox.0/r0drv/linux -I/tmp/vbox.0/vboxdrv/
> -I/tmp/vbox.0/vboxdrv/include -I/tmp/vbox.0/vboxdrv/r0drv/linux
> -D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0
> -DVBOX -DRT_WITH_VBOX -DVBOX_WITH_HARDENING -DSUPDRV_WITH_RELEASE_LOGGER
> -Wno-declaration-after-statement -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_AMD64
> -DVBOX_WITH_64_BITS_GUESTS -fno-pie -DMODULE
> -DKBUILD_BASENAME='"SUPDrv_linux"' -DKBUILD_MODNAME='"vboxdrv"' -c -o
> /tmp/vbox.0/linux/SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c
> gcc: error: unrecognized command line option ???-fstack-protector-strong???
> make[2]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Fout 1
> make[1]: *** [_module_/tmp/vbox.0] Fout 2
> make: *** [vboxdrv] Fout 2
>
>
>
>
>
> *Maar ik krijg nog steeds de virtuele machine niet opgestart.Wat moet ik
> nog meer doen?Alvast bedankt voor de hulp.*
>
Op mailinglist debian-user-dutch kwam iets soortsgelijks voorbij.
Daar was schijnbaar de truuk
dpkg-reconfigure virtualbox-dkms
Laat vooral weten of dat (wel of niet) geholpen heeft.
Zie eventueel https://lists.debian.org/debian-user-dutch/2018/06/msg00022.html
Groeten
Geert Stappers
--
Leven en laten leven
Meer informatie over de Linux
maillijst