[linux] mislukkende k3b-schrijf-operatie, waar zit de fout?

Wo Jul 10 18:07:45 CEST 2019

Het is me voor de zoveelste keer niet gelukt met k3b een cd
te kopiëren.  Ik vraag me af wat de oorzaak kan zijn: mogelijk
onwillige "ISY"-cd's, of misschien de cd-schrijver. Ik heb de
foutmeldingen van k3b weg geschreven, en de hele output van k3b
ziet eruit als volgt:
(Halverwege, nadat de input-cd is gelezen komt een foutmelding,
en op die plaats heb ik duidelijk "Hier begint het" geschreven.

De k3b-output:

Devices
-----------------------
HL-DT-ST DVDRAM GUE0N T.02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, 
DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R 
Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, 
DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R 
Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, 
RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

System
-----------------------
K3b Version: 17.12.3
KDE Version: 5.44.0
Qt Version:  5.9.5
Kernel:      4.18.0-25-generic

Used versions
-----------------------
cdrecord: 1.1.11

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if 
device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GUE0N    '
Revision       : 'T.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P 
RAW/R96R
Drive buf size : 262144 = 256 KB
FIFO size      : 12582912 = 12288 KB
Encoding speed : 1000x (75000 sectors/s) for libedc from Heiko Ei?feldt
Speed set to 4234 KB/s
Track1 Start: '33' (33)
pregap1: 183
Track 01: audio  139 MB (13:51.00) no preemp      pregapsize: 183
Track 02: audio  131 MB (13:03.00) no preemp      pregapsize:   0
Track 03: audio   73 MB (07:17.66) no preemp      pregapsize:   0
Track 04: audio  113 MB (11:15.00) no preemp      pregapsize:   0
Track 05: audio   56 MB (05:38.33) no preemp      pregapsize:   0
Track 06: audio   56 MB (05:36.00) no preemp      pregapsize:   0
Total size:      572 MB (56:41.44) = 255108 sectors
Lout start:      572 MB (56:43/33) = 255108 sectors
Current Secsize: 2048
ATIP info from disk:
   Indicated writing power: 5
   Is not unrestricted
   Is not erasable
   Disk sub type: Medium Type B, low Beta category (B-) (4)
   ATIP start of lead in:  -12369 (97:17/06)
   ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 104741

=======
Hier begint het schrijf-proces
========

Starting to write CD/DVD at speed  24.0 in real RAW/RAW96R mode for 
single session.
Last chance to quit, starting real write in    2 seconds.
    1 seconds.
    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
/usr/bin/wodim: WARNING: Drive returns wrong startsec (0) using -12369 
from ATIP
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF CF AF 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 34.215s timeout 40s
/usr/bin/wodim: Could not write Lead-in.
Writing lead-in at sector -12369
write leadin data: error after 0 bytes
Writing  time:   34.340s
/usr/bin/wodim: fifo had 191 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 
100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=24 -raw96r 
driveropts=burnfree -text -useinfo -audio -shorttrack 
/tmp/k3bCdCopy0/Track01.wav /tmp/k3bCdCopy0/Track02.wav 
/tmp/k3bCdCopy0/Track03.wav /tmp/k3bCdCopy0/Track04.wav 
/tmp/k3bCdCopy0/Track05.wav /tmp/k3bCdCopy0/Track06.wav

====
einde k3b-output
====

Kort na begin van het schrijfproces komt deze foutmelding:
/usr/bin/wodim: WARNING: Drive returns wrong startsec (0) using -12369 
from ATIP
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error

Wat kan hier de reden van zijn: verkeerde cd of mogelijk een verkeerde
cd-schrijver?

Iemand die mij een hint kan geven?
Bij voorbaat dank,
Julien

-- 
Julien Michielsen
julien op michkloo.xs4all.nl